IEC 60086-3-2021 pdf Primary batteries – Part 3: Watch batteries
![IEC 60086-3-2021 pdf Primary batteries – Part 3: Watch batteries](https://www.freedocumentsdownload.com/wp-content/uploads/2023/11/20231129121908f1bc2.png)
5.2 Closed circuit voltage U cc (CCV), internal resistance and impedance Closed circuit voltage and internal resistance shall be measured according to 7.2. AC impedance should be measured with an LCR meter. Limit values shall be agreed between the manufacturer and the purchaser. 5.3 Capacity The capacity shall be agreed between the manufacturer and the purchaser on the basis of a continuous discharge test, according to 7.2.6. 5.4 Capacity retention The capacity retention is the ratio between the capacities under the given discharge conditions measured on fresh batteries and a sample of the same lot stored during 365 days at (20 ± 2) °C and a relative humidity between (55 ± 20) %. The ratio of capacity retention shall be agreed between the manufacturer and the purchaser. The minimum value should be at least 90 % for a period of 1 2 months. The capacity measurement is carried out according to 7.2.6. For the purpose of verifying compliance with this document, conditional acceptance may be given after completion of the initial capacity tests.
6 Sampling and quality assurance The use of sampling plans or product quality indices should be agreed between manufacturer and purchaser. Where no agreement is specified, refer to ISO 2859 and ISO 21 747 for sampling and quality compliance assessment advice. 7 Test methods 7.1 Shape and dimensions 7.1.1 Shape requirement The shape of the negative contact is checked preferably by optical projection or by an open gauge according to Figure 3. The measurement method shall be agreed between the manufacturer and the purchaser.
Procedure: The procedure to inspect with the open gauge is shown. The battery is moved toward the side A of the gauge while applying the outer periphery of the positive electrode to the side B and maintaining the flat part of the negative electrode terminal at 90 ° with respect to the side B. A battery having a gap without contact between the side A of the gauge and the flat part of the negative electrode terminal does not satisfy the requirements. NOTE The surface of the open gauge is made of non-conductive hard resin to prevent external short circuit.
- ISO IEC 27050-4-2021 pdf Information technology — Electronic discovery — Part 4: Technical readiness
- ISO IEC 27036-1-2021 pdf Cybersecurity — Supplier relationships — Part 1: Overview and concepts
- ISO IEC 27013-2021 pdf Information security, cybersecurity and privacy protection — Guidance on the integrated implementation of ISO/IEC 27001 and ISO/IEC 20000-1
- ISO IEC 26580-2021 pdf Software and systems engineering — Methods and tools for the feature- based approach to software and systems product line engineering
- ISO IEC 24735-2021 pdf Information technology — Office equipment — Method for measuring digital copying productivity
- ISO IEC 24711-2021 pdf Information technology — Office equipment — Method for the determination of ink cartridge yield for colour inkjet printers and multi- function devices that contain printer components
- ISO IEC 23544-2021 pdf Information Technology — Data centres — Application Platform Energy Effectiveness (APEE)
- ISO IEC 23510-2021 pdf Information technology — 3D printing and scanning — Framework for an Additive Manufacturing Service Platform (AMSP)
- ISO IEC 23127-1-2021 pdf Information technology — Learning, education, and training — Metadata for facilitators of online learning — Part 1: Framework
- ISO IEC 23126-2021 pdf Information technology for learning, education and training — Ubiquitous learning resource organization and description framework
- IEC 62083-2009 pdf Medical electrical equipment – Requirements for the safety of radiotherapy treatment planning systems
- IEC TR 62222-2021 pdf Fire performance of communication cables installed in buildings
- IEC 63171-2-2021 pdf Connectors for electrical and electronic equipment – Part 2: Detail specification for 2-way, shielded or unshielded, free and fixed connectors: mechanical mating information, pin assignment and additional requirements for type 2
- IEC 62148-21-2021 pdf Fibre optic active components and devices – Package and interface standards – Part 21: Design guidelines of electrical interface of PIC packages using silicon fine-pitch ball grid array (S-FBGA) and silicon fine-pitch land grid array (S‑FLGA)
- IEC 62973-4-2021 pdf Railway applications – Rolling stock – Batteries for auxiliary power supply systems – Part 4: Secondary sealed nickel-metal hydride batteries
- BS ISO IEC 15420-2009 pdf Information technology一 Automatic identification and data capture techniques EAN/UPC bar code symbology specification
- BS ISO IEC 19762.5-2008 pdf Information technology一 Automatic identification and data capture (AIDC) techniques – Harmonized vocabulary Part 5: Locating systems
- BS IEC 60860-2014 pdf Radiation protection instrumentation一 Warning equipment for criticality accidents
- ISO IEC 24711-2021 pdf Information technology — Office equipment — Method for the determination of ink cartridge yield for colour inkjet printers and multi- function devices that contain printer components
- ISO IEC 24735-2021 pdf Information technology — Office equipment — Method for measuring digital copying productivity