IEC 61500-2009 pdf Nuclear power plants – Instrumentation and control important to safety – Data communication in systems performing category A functions
5 General requirements 5.1 Principles of selection of data communication techniques and equipment The communications equipment shall meet requirements for systems performing category A functions. NOTE To ensure acceptability for nuclear applications one of the following principles for selection of data communication techniques and equipment can be applied: • use of protocols implementing safety features; • use of industrial standard protocols with added safety layers; • use of protocols where higher protocol layers implementing unsafe or not needed functionality are removed or replaced by ones with reduced and safe functionality. The hardware and the software shall be qualified, see Clause 9. 5.2 Functional requirements Generally each data communication channel is part of an overall system providing services of information gathering and presentation, control or protection of the nuclear power plant. Equipment providing cyclic data over a communication channel shall not depend on the receipt of acknowledge messages from the receiver for continued operation. Communication channels shall not be allocated dynamically during the run time of the system but shall be statically allocated and predefined by design. All messages of application software shall be transmitted periodically within a pre-defined variation of cycle time. Messages should have fixed length predefined by design. The communication system shall enable messages from instruments or other outstation equipment using a communications channel to be sent and received within a specified time frame, together with data integrity status information (if implemented). The data communication network topology and media access control shall be designed and implemented to avoid CCF of independent systems or subsystems (see 8.3).
6 Physical separation and isolation 6.1 Electrical isolation The electrical isolation of systems performing category A functions connected by communication channels to other systems shall be considered in accordance with IEC 60709. The degree of electrical isolation will depend on the station power supply voltages present, national practice, and plant-specific requirements. NOTE A method of achieving a high degree of electrical isolation is by means of optical fibre connections or opto- electronic isolators. Appropriate isolation shall be demonstrated between data communication equipment and connected equipment. This shall be sufficient to prevent faults of the connected equipment and cables from affecting the operation of the data communication equipment adversely. Connected equipment includes sensors, contacts, power supplies and other communication equipment.
- Previous:IEC 61726-2015 pdf Cable assemblies, cables, connectors and passive microwave components – Screening attenuation measurement by the reverberation chamber method
- Next:IEC 61453-2007 pdf Nuclear instrumentation – Scintillation gamma ray detector systems for the assay of radionuclides – Calibration and routine tests
- ISO IEC 27050-4-2021 pdf Information technology — Electronic discovery — Part 4: Technical readiness
- ISO IEC 27036-1-2021 pdf Cybersecurity — Supplier relationships — Part 1: Overview and concepts
- ISO IEC 27013-2021 pdf Information security, cybersecurity and privacy protection — Guidance on the integrated implementation of ISO/IEC 27001 and ISO/IEC 20000-1
- ISO IEC 26580-2021 pdf Software and systems engineering — Methods and tools for the feature- based approach to software and systems product line engineering
- ISO IEC 24735-2021 pdf Information technology — Office equipment — Method for measuring digital copying productivity
- ISO IEC 24711-2021 pdf Information technology — Office equipment — Method for the determination of ink cartridge yield for colour inkjet printers and multi- function devices that contain printer components
- ISO IEC 23544-2021 pdf Information Technology — Data centres — Application Platform Energy Effectiveness (APEE)
- ISO IEC 23510-2021 pdf Information technology — 3D printing and scanning — Framework for an Additive Manufacturing Service Platform (AMSP)
- ISO IEC 23127-1-2021 pdf Information technology — Learning, education, and training — Metadata for facilitators of online learning — Part 1: Framework
- ISO IEC 23126-2021 pdf Information technology for learning, education and training — Ubiquitous learning resource organization and description framework
- IEC 60243-2-2013 pdf Electric strength of insulating materials – Test methods – Part 2: Additional requirements for tests using direct voltage
- IEC 62845-2015 pdf Railway applications – Radio remote control system of traction vehicles for shunting application
- IEC 62372-2021 pdf Nuclear instrumentation – Housed scintillators – Test methods of light output and intrinsic resolution
- IEC 60794-1-403-2021 pdf Optical fibre cables – Part 1-403: Generic specification – Basic optical cable test procedures – Electrical test methods – Electrical continuity test of cable metallic elements, method H3
- IEC 62397-2007 pdf Nuclear power plants – Instrumentation and control important to safety – Resistance temperature detectors
- BS ISO IEC 15420-2009 pdf Information technology一 Automatic identification and data capture techniques EAN/UPC bar code symbology specification
- BS ISO IEC 19762.5-2008 pdf Information technology一 Automatic identification and data capture (AIDC) techniques – Harmonized vocabulary Part 5: Locating systems
- BS IEC 60860-2014 pdf Radiation protection instrumentation一 Warning equipment for criticality accidents
- ISO IEC 24711-2021 pdf Information technology — Office equipment — Method for the determination of ink cartridge yield for colour inkjet printers and multi- function devices that contain printer components
- ISO IEC 24735-2021 pdf Information technology — Office equipment — Method for measuring digital copying productivity