IEC 61156-8-2013 pdf Multicore and symmetrical pair/quad cables for digital communications – Part 8: Symmetrical pair/quad cables with transmission characteristics up to 1 200 MHz – Work area wiring – Sectional specification
![IEC 61156-8-2013 pdf Multicore and symmetrical pair/quad cables for digital communications – Part 8: Symmetrical pair/quad cables with transmission characteristics up to 1 200 MHz – Work area wiring – Sectional specification](https://www.freedocumentsdownload.com/wp-content/uploads/2023/11/20231128111657dcd18.png)
6.3.7 Alien (exogenous) near-end crosstalk Generally proven by design. 6.3.8 Alien (exogenous) far-end crosstalk Generally proven by design. 6.3.9 Alien (exogenous) crosstalk of bundled cables The minimum requirement is not specified but it should be stated in the relevant detail specification. 6.3.10 Impedance The mean characteristic impedance shall be within ±5 % of the requested nominal impedance at 1 00 MHz. 6.3.11 Return loss (RL) The minimum return loss of any pair in the frequency 1 MHz to 1 200 MHz shall be equal to or greater than the values obtained from Table 4.
6.4.11 Repeated bending of the cable The cable shall withstand 500 cycles without cracking of the insulation or sheath or loss of continuity of the metallic components. 6.4.12 Tensile performance of the cable The tensile strength of the cable is not specified but may be indicated in the relevant detail specification. 6.4.13 Shock test of the cable Not applicable. 6.4.14 Bump test of the cable Not applicable. 6.4.15 Vibration test of a cable Not applicable. 6.5 6.5.1 Environmental characteristics Shrinkage of insulation When tested at (1 00 ± 2) °C for 1 h, the shrinkage of the insulation shall not exceed 5 %. The length of the sample shall be 1 50 mm, and the shrink-back shall be measured as the sum from both ends. 6.5.2 Wrapping test of insulation after thermal ageing Not applicable. 6.5.3 Bending test of insulation at low temperature The bending test of the insulated conductor shall be carried out at (–20 ± 2) °C. The mandrel diameter shall be 6 mm. There shall be no cracks in the insulation. 6.5.4 Elongation at break of the sheath after ageing The ageing regime shall be 7 days at (1 00 ± 2) °C. The tensile strength shall not be less than 50 % of the unaged value. 6.5.5 Tensile strength of the sheath after ageing The ageing regime shall be 7 days at (1 00 ± 2) °C. The elongation shall not be less than 70 % of the unaged value. 6.5.6 Sheath pressure test at high temperature Not applicable. 6.5.7 Cold bend test of the cable The bending test shall be carried out at (–20 ± 2) °C. The mandrel diameter shall be eight times the overall diameter of the cable. There shall be no cracks in the sheath.
- ISO IEC 27050-4-2021 pdf Information technology — Electronic discovery — Part 4: Technical readiness
- ISO IEC 27036-1-2021 pdf Cybersecurity — Supplier relationships — Part 1: Overview and concepts
- ISO IEC 27013-2021 pdf Information security, cybersecurity and privacy protection — Guidance on the integrated implementation of ISO/IEC 27001 and ISO/IEC 20000-1
- ISO IEC 26580-2021 pdf Software and systems engineering — Methods and tools for the feature- based approach to software and systems product line engineering
- ISO IEC 24735-2021 pdf Information technology — Office equipment — Method for measuring digital copying productivity
- ISO IEC 24711-2021 pdf Information technology — Office equipment — Method for the determination of ink cartridge yield for colour inkjet printers and multi- function devices that contain printer components
- ISO IEC 23544-2021 pdf Information Technology — Data centres — Application Platform Energy Effectiveness (APEE)
- ISO IEC 23510-2021 pdf Information technology — 3D printing and scanning — Framework for an Additive Manufacturing Service Platform (AMSP)
- ISO IEC 23127-1-2021 pdf Information technology — Learning, education, and training — Metadata for facilitators of online learning — Part 1: Framework
- ISO IEC 23126-2021 pdf Information technology for learning, education and training — Ubiquitous learning resource organization and description framework
- IEC TR 62222-2021 pdf Fire performance of communication cables installed in buildings
- ISO IEC 24735-2021 pdf Information technology — Office equipment — Method for measuring digital copying productivity
- IEC 62077-2015 pdf Fibre optic interconnecting devices and passive components – Fibre optic circulators – Generic specification
- IEC 61386-21-2021 pdf Conduit systems for cable management – Part 21: Particular requirements – Rigid conduit systems
- IEC 60794-1-211-2021 pdf Optical fibre cables – Part 1-211: Generic specification – Basic optical cable test procedures – Environmental test methods – Sheath shrinkage, method F11
- BS ISO IEC 15420-2009 pdf Information technology一 Automatic identification and data capture techniques EAN/UPC bar code symbology specification
- BS ISO IEC 19762.5-2008 pdf Information technology一 Automatic identification and data capture (AIDC) techniques – Harmonized vocabulary Part 5: Locating systems
- BS IEC 60860-2014 pdf Radiation protection instrumentation一 Warning equipment for criticality accidents
- ISO IEC 24711-2021 pdf Information technology — Office equipment — Method for the determination of ink cartridge yield for colour inkjet printers and multi- function devices that contain printer components
- ISO IEC 24735-2021 pdf Information technology — Office equipment — Method for measuring digital copying productivity